• IP-F1218P-16-250W

F1218P-16-250W

16FE+1GE/1SFP Managed Switch With 16-Port PoE
  • - Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3z,IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, IEEE 802.1d, IEEE 802.1w and IEEE802.3af/at standards.
  • - 16 * 10/100 Mbps Base-TX RJ45 ports for data transmission and power supply, 1 * 10/100/1000 Mbps Base-T RJ45 ports for data transmission, 1 * 1000 Mbps Base-X combo SFP slot
  • - 4 K MAC address table and MAC address auto-learning.
  • - IEEE 802.3x-compliant full-duplex flow control and half-duplex backpressure flow control.
  • - 7.2 Gbps backplane bandwidth.
  • - Maximum power consumption of a single port: 30W; Maximum power consumption of the switch: 250W.
  • - 2.75 Mb cache size for smooth video surveillance.
  • - Support Web management, 802.1Q VLAN, link aggregation, QoS and MAC address binding.
  • - Standard rack-mounting design


F1218P-16-250W is a managed PoE switch independently designed by IP-COM. Featured with 16 IEEE 802.3at/af-compliant RJ45 ports, it supplies a maximum PoE power output of 230 W. The switch can supply power when transmitting data with APs, IP cameras, and IP phones through CAT5 cables . Featured smart management functions, including 250 m long distance power supply, 802.1Q VLAN, link aggregation, QoS and MAC address binding, it minimizes the difficulty and cost in networking deployment.


Hardware specifications
StandardsIEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.1p, IEEE802.1q, IEEE802.1w, IEEE802.3af/at
LED indicators16 * Link/Act LEDs
1 * G1 LED
1 * G2/SFP2 LED
1 * PoE-MAX LED
1 * Power LED
1 * SYS LED
Interfaces16 * 10/100 Mbps Base-TX RJ45 ports (Data/Power)
1 * 10/100/1000 Mbps Base-T RJ45 ports (Data)
1 * 1000 Mbps Base-X SFP port (Combo)
Lightning protectionPort: 6kV
Power: 6kV
Forwarding modeStore-and-forward
Switching capability7.2 Gbps
Packet forwarding rate5.36 Mpps
Buffer2.75 Mb
MAC address table4K
PoE supplyPorts 1-16 support standard IEEE802.3af/at
30W output per PoE port
230W output of the total PoE Power
Power consumption250W output the whole device
Input voltageAC:100-240V~ 50/60Hz
Dimensions440 mm x 178.8 mm x 44 mm(L*W*H)
Operating environmentOperating temperature: 0°C - 45℃
Storage temperature: -40°C - 70°C
Operating humidity: (10% - 90%)RH, non-condensing
Storage humidity: (5% - 90%)RH, non-condensing
CertificatesCCC、FCC、CE、RoHS
Software specifications
PoE managementSupport over temperature protection for PoE module
Support graphical management
detection of PD equipment
VLANSupports Port VLAN
Supports 802.1Q VLAN
SecurityMAC-Port Binding
Link aggregationStatic Trunk Supports 3 groups of 4-Port trunk support
Spanning treeSTP/RSTP
IGMP SnoopingIGMP (v1/v2) Snooping
Port MirroringN: 1 port mirroring
QoS802.1p and DSCP priority re-marking
Flow control
Flexible queue scheduling algorithm can be set
based on port and queue, support SP, WRR
Firmware upgradeUpgrade via the Web
Management and maintenanceSupport SNMP v1/v2 and WEB-based management


Write a review

Note: HTML is not translated!
    Bad           Good

IP-F1218P-16-250W

  • Brand: IPCOM
  • Product Code: [Pre-Order ETA in 3-4Weeks]F1218P-16-250W
  • Availability: In Stock
  • RM1,000.00